Видео

Thanks! It is super simple but works so well!

Glad you like them!

Yes that’s right! When switching blades it is best to dedicate one of the 4 sides of the insert to each blade size. Extra inserts are also available!

Late this week or early next week 🙂

We can certainly ship! Send us an email with your address and we can get you a quote - info@stockroomsupply.com

Ceramic guides are great! Just need to be careful with setup as they can strip bandsaw teeth if setup incorrectly. Thanks very much! Glad you like it 🙂

That’s the beauty of the phenolic/graphite lock blocks. The teeth can cut into them without any risk of teeth damage. Because of this there is no need for a forward and back adjustment 🙂

Thanks! And very soon! They will be available around the end of the month

Not yet! But they will be available by the end of the month or so

We have them listed here now - stockroomsupply.com/products/bladelock-bandsaw-guide-insert?_pos=3&_sid=ed4bc1201&_ss=r

Thanks so much! And thanks for watching

Thanks for watching!

You will need remove the BladeLock when tilting the table, so no it will not.

Thanks so much!

At this point we don't. But you could make an adapter ring if you had a lathe. Thanks for watching!

That hasn't been my experience. This video shows how little difference the blade alignment on the wheel makes - ruclips.net/video/4k-r5utmU2Q/видео.htmlsi=TvWy6wrTFP6a5lrh&t=379 Thanks for watching!

Originally we designed the Little Ripper to cut logs but then realized most customers are using it to resaw! Here’s a video showing how to set it up to do just that - ruclips.net/video/VeuALqx1uAA/видео.htmlsi=hATcrZUtZQ8OQ6SV Thanks for watching!

@@StockroomSupply Ethan, thank you. Actually bought one a couple of years ago but life got in the way to use it between selling, moving, new shop and total knee replacement on one with the other in the works at least my mind is into woodworking/woodturning.

The upgraded filter will give you better overall airflow(about 15% increase) but if you are ducting it outside the better filtration doesn’t matter. Choice is yours!

$45 ... $40 too much for a piece of plastic

Here’s a link to them on our website - stockroomsupply.com/products/bladelock-bandsaw-guide-insert?_pos=1&_sid=dcdf25572&_ss=r

The body is made from a carbon fibre polyester blend with phenolic/canvas/graphite guides with all stainless steel hardware. A piece of plastic may be an oversimplification 🙂

That’s right! Though you can rotate the lock blocks 4 different ways to have it set for different size blades

@@StockroomSupplyokay that’s great to know. Sorry if you stated and I missed that. Can I order extra inserts to accommodate different blades or perhaps not necessary if it’s the same size blade even if a different brand?

You definitely can! We haven’t got them listed on the website yet…just respond to your order confirmation you’d like extra lock blocks and how many. Thanks!

@@StockroomSupply thank you

It might be! Feel free to send a little info on the insert size and we may be able to get one that fits. Info@stockroomsupply.com

@@StockroomSupply there is a round hole with a shoulder. even if i had to turn an "adaptor" from a hardwood piece

@@StockroomSupply the hole is 3" and it's 5/16 to the top of the shoulder from the table surface

Thanks very much! The lock block material is phenolic impregnated with graphite. It is tough, wear resistant, self lubricating and can be machined with standard wood cutting tools. You can cut into the guides with no ill effect on your bandsaw blade. Thanks again!

I was just going to ask that too!

demmit.. looks like you dont. any plans on coming up with one that will work on that saw? Id be happy to be your guinnea pig test guy :)

so I just measured the insert on the Jet JWBS-18 its 2.5" wonder if that delta clone would work or not? The Jet inserts do have tiny little half moon cuts outs for locking them in place 90 degrees on either side of the blade. Easy enough to drill out. What do you think @EthhanMoore @StockroomSupply Will it work?

Very likely! Send me a quick picture and I can verify 100% Info@stockroomsupply.com

@@StockroomSupply just emailed you

Thanks very much! I know a little bit 🙂

Thanks so much!

Thanks and we are working on it! So far we have them to fit nearly all round insert saws…what type of bandsaw do you have?

@@StockroomSupply Harvey Ambassador 14”

Bad news…the insert size is too small to accommodate the BladeLock insert. The lock blocks are 3/4” square alone. Thanks for watching!

Do you have one that will fit a Crftsman model 113.243411 with a 3 3/8" diameter opening?

@@ljgault just fixed! Sorry bout that

Is it a 14” porter cable with a 2.5” round insert? If so yes!

At this point no…but definitely on the radar! If you could send us some measurements and pictures of the Shop Smith insert and we can see if it’s feasible. Info@stockroomsupply.com Thanks for watching!

@@StockroomSupply wil do! I really like your notion and product!

@@RYwoodview just fixed, sorry about that! And thanks very much

@@StockroomSupply Great. Just ordered. Thanks.

Yes the lock blocks are available for purchase separately

Nope! They can be cut with the blade teeth with no risk of blade damage

@@turningwiththewoods absolutely! Free shipping in Canada and the USA 🇨🇦🇺🇸

@@StockroomSupply you know when you will have for laguna 1412?

@@turningwiththewoods should be before the end of august. That’s the next on the docket 👍

@@StockroomSupply excellent. Thanks

Unfortunately not that I am aware of. Might be worth sending an email to Rikon’s tech team though!

@@StockroomSupply Thanks so much! Great idea to reach out to Rikon. Thanks for the video and info!!

Thanks very much! Send us an email to info@stockroomsupply.com and we can find you a shipping quote 👍

I made one, misplaced the paper and then broke my anemometer lol Send me an email and if I find it I’ll send it over. Info@stockroomsupply.com

The neat thing about the track is you can join them together! With one extra piece you can cut up to 4’ like this video - ruclips.net/video/WGQ906MZdiE/видео.htmlsi=TeJyDdU2SShd3lgH Or if you really want to get excited you can use our Sawmill package for up to 8’! Here’s a video - ruclips.net/video/YmGhMCgS7SU/видео.htmlsi=yxz1W8uslQS3gmL2

If you asked Forrest they would say “absolutely not!” but if you asked Ridge Carbide they’d “absolutely can!” Lol. I would say Ridge would do a great job on your Forrest blade. I hope this helps!

Thanks so much!! You may find this setup video helpful - ruclips.net/video/xkHchvzInHc/видео.htmlsi=boUjG-2HpwHthMzh Thanks for watching!

@@StockroomSupply Thank you, I will check that out for sure.

We certainly are the designers, makers and sellers the Little Ripper Sawmill! Here's a link to where to find them on our site - stockroomsupply.com/collections/little-ripper-mini-sawmill-1

As far as fence setups go on a bandsaw that is quite good! There are still a number of issues I chat more about in this video - ruclips.net/video/sY7xKKUGBgE/видео.htmlsi=gaQCLHDWdcLxnil2 Also if you are interested here's a video of the Little Ripper cutting an 8' long red oak beam - ruclips.net/video/YmGhMCgS7SU/видео.htmlsi=Ga3Ht0XwRcJejMqX Thanks for watching!

The Camvac perform exceptionally well on the fine sawdust especially compared to a traditional single stage bag unit. A 2 motor Camvac would be a great fit for those two tools

Yes we do! Just send us your zip code to info@stockroomsupply.com and we can give you a shipping quote.

Bandsaws are incredibly frustrating! I’ve certainly swore at mine a few times lol. Start with a fresh blade, only use that blade with a carriage and the drift issue goes away. I hope that makes sense!